Dealers Supply Inc.
1-800-524-0576
PICTURE HANGING SYSTEM FOR SHOW BOOTH SETUPS
This is the perfect system for the travelling artist or others who hang artwork or sinage in their show booths.
Consisting of super lightweight, super tough rods made from either steel, fiberglass or acrylic, and steel hooks and clips which
screw onto the rods, everything can be hung in place in a matter of minutes. Also useable with canopy frames.
No tools needed!
The rods are: 1/4" square and are made of either fiberglass in bronze, white or gray color, clear acrylic or silver steel. Specify color desired when ordering.
Your work is hung on rods which are attached vertically from either a universal or pipe-and-drape rod sleeve that is hung over the framework of your canopy, drapery frame or other type of "wall".
Molding for indoor use use is available wth a corresponding rod sleeve.
You may hang more than one piece from one rod, depending on the size of the pieces, arranged one above another, and you may need more than one rod for larger work, 4 feet or so in width, to support the extra weight.
A setup to hang textiles is also available. Please call us for information.
Rod prices are as follows:
| LENGTH |
|
Steel |
|
Acrylic & Fiberglass |
|
|
|
|
|
|
|
|
3'
|
|
$8.00 |
|
$3.00 |
|
|
|
|
|
|
|
| 4' |
|
$10.00 |
|
$4.00 |
|
|
|
|
|
|
|
| 5' |
|
$12.00 |
|
$5.00 |
|
|
|
|
|
|
|
| 6' |
|
$14.00 |
|
$6.00 |
|
|
|
|
|
|
|
|
Rod Connector
For connecting 2 rods for added length.
For heavier, larger artwork, 2 rods (one on each end) are reccommended for extra strength.
Most users find it convenient to use a 4' length rod and add additional length if needed, rather than use a rigid 6' or 8' rod. This will make it easier to transport the system to and from shows and help to keep shipping charges down.
$3.95 plus s&h
|
 |
|
1. / 1A. Pipe and Drape Hook
The Pipe and Drape Hook- 1 & 1A, hooks right
onto the usual a.k.a.
standard-style
"Pipe and Drape" convention and exhibit booths. Picture 1A shows sideview of the
P&D Hook in use.
2. Universal Rod Hook
The Universal Hook is designed to
work in almost every situation if you're not
sure which to use or are using an unusual
style setup.
Either Style Hook $5.95 plus s&h
|
1. 1A. 
2. 
|
Hi-Holder
Designed for the hanging wire on most artworks. They hold the wire tight against the rod, the picture against the wall, yet remain concealed behind the picture. The 5" width ensures the picture will stay level.
$5.95 plus s&h
$50.00 plus s&h for 10 pk.
|
 |
|
Frame Hook
Fits between the frame and the matting. The 3/8" Frame Hook is for metal frames while the 7/8" Frame Hook holds most wood canvas stretchers. Hang large frames or canvasses quickly and easily with two Rods and two Frame Hooks.
3/8" d. $3.95 plus s&h
7/8" d. $4.95 plus s&h
|
 |
|
Hi-Hook
Fulfills two different functions. First, they hang smaller frames or plaques that have a "sawtooth" bracket or similar fixture. However they do not provide the same stability as the Hi-Holder or Frame Hook. Secondly, the Hi-Hook can be used in pairs along with a Spacer Rod (sold seperately) to hang large paintings over 36" in width.
$3.95 plus s&h
|
|
|
Long Holder
Sized to accept frames, mats or panels with thicknesses from 1/4" to 1 1/2"(specify thickness). Use in pairs on a single rod for smaller work. For larger frames or panels, use two or more rods.
All are 5" long
$4.95 plus s&h
|
 |
|
Single Clip
These are a single badge-type clip on a 3" steel back. Perfect for artist identification cards or any small item. (Also available in double 8" size @ $6.95 ea)
$4.95 plus s&h
$45.00 plus s&h for 10 pack
Back to top
Products index
|
 |
